From 8d75fc5186f3c7772ea1e95fa8220770c892b476 Mon Sep 17 00:00:00 2001 From: Christopher Meinhold Date: Tue, 20 Aug 2024 16:30:20 +0200 Subject: [PATCH] Erster Push --- .gitattributes | 63 ++++++ .gitignore | 363 +++++++++++++++++++++++++++++++ RHS-Sachsen.sln | 25 +++ RHS-Sachsen/Form1.Designer.cs | 383 +++++++++++++++++++++++++++++++++ RHS-Sachsen/Form1.cs | 89 ++++++++ RHS-Sachsen/Form1.resx | 120 +++++++++++ RHS-Sachsen/Program.cs | 17 ++ RHS-Sachsen/RHS-Sachsen.csproj | 16 ++ 8 files changed, 1076 insertions(+) create mode 100644 .gitattributes create mode 100644 .gitignore create mode 100644 RHS-Sachsen.sln create mode 100644 RHS-Sachsen/Form1.Designer.cs create mode 100644 RHS-Sachsen/Form1.cs create mode 100644 RHS-Sachsen/Form1.resx create mode 100644 RHS-Sachsen/Program.cs create mode 100644 RHS-Sachsen/RHS-Sachsen.csproj diff --git a/.gitattributes b/.gitattributes new file mode 100644 index 0000000..1ff0c42 --- /dev/null +++ b/.gitattributes @@ -0,0 +1,63 @@ +############################################################################### +# Set default behavior to automatically normalize line endings. +############################################################################### +* text=auto + +############################################################################### +# Set default behavior for command prompt diff. +# +# This is need for earlier builds of msysgit that does not have it on by +# default for csharp files. +# Note: This is only used by command line +############################################################################### +#*.cs diff=csharp + +############################################################################### +# Set the merge driver for project and solution files +# +# Merging from the command prompt will add diff markers to the files if there +# are conflicts (Merging from VS is not affected by the settings below, in VS +# the diff markers are never inserted). Diff markers may cause the following +# file extensions to fail to load in VS. An alternative would be to treat +# these files as binary and thus will always conflict and require user +# intervention with every merge. To do so, just uncomment the entries below +############################################################################### +#*.sln merge=binary +#*.csproj merge=binary +#*.vbproj merge=binary +#*.vcxproj merge=binary +#*.vcproj merge=binary +#*.dbproj merge=binary +#*.fsproj merge=binary +#*.lsproj merge=binary +#*.wixproj merge=binary +#*.modelproj merge=binary +#*.sqlproj merge=binary +#*.wwaproj merge=binary + +############################################################################### +# behavior for image files +# +# image files are treated as binary by default. +############################################################################### +#*.jpg binary +#*.png binary +#*.gif binary + +############################################################################### +# diff behavior for common document formats +# +# Convert binary document formats to text before diffing them. This feature +# is only available from the command line. Turn it on by uncommenting the +# entries below. +############################################################################### +#*.doc diff=astextplain +#*.DOC diff=astextplain +#*.docx diff=astextplain +#*.DOCX diff=astextplain +#*.dot diff=astextplain +#*.DOT diff=astextplain +#*.pdf diff=astextplain +#*.PDF diff=astextplain +#*.rtf diff=astextplain +#*.RTF diff=astextplain diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..9491a2f --- /dev/null +++ b/.gitignore @@ -0,0 +1,363 @@ +## Ignore Visual Studio temporary files, build results, and +## files generated by popular Visual Studio add-ons. +## +## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore + +# User-specific files +*.rsuser +*.suo +*.user +*.userosscache +*.sln.docstates + +# User-specific files (MonoDevelop/Xamarin Studio) +*.userprefs + +# Mono auto generated files +mono_crash.* + +# Build results +[Dd]ebug/ +[Dd]ebugPublic/ +[Rr]elease/ +[Rr]eleases/ +x64/ +x86/ +[Ww][Ii][Nn]32/ +[Aa][Rr][Mm]/ +[Aa][Rr][Mm]64/ +bld/ +[Bb]in/ +[Oo]bj/ +[Oo]ut/ +[Ll]og/ +[Ll]ogs/ + +# Visual Studio 2015/2017 cache/options directory +.vs/ +# Uncomment if you have tasks that create the project's static files in wwwroot +#wwwroot/ + +# Visual Studio 2017 auto generated files +Generated\ Files/ + +# MSTest test Results +[Tt]est[Rr]esult*/ +[Bb]uild[Ll]og.* + +# NUnit +*.VisualState.xml +TestResult.xml +nunit-*.xml + +# Build Results of an ATL Project +[Dd]ebugPS/ +[Rr]eleasePS/ +dlldata.c + +# Benchmark Results +BenchmarkDotNet.Artifacts/ + +# .NET Core +project.lock.json +project.fragment.lock.json +artifacts/ + +# ASP.NET Scaffolding +ScaffoldingReadMe.txt + +# StyleCop +StyleCopReport.xml + +# Files built by Visual Studio +*_i.c +*_p.c +*_h.h +*.ilk +*.meta +*.obj +*.iobj +*.pch +*.pdb +*.ipdb +*.pgc +*.pgd +*.rsp +*.sbr +*.tlb +*.tli +*.tlh +*.tmp +*.tmp_proj +*_wpftmp.csproj +*.log +*.vspscc +*.vssscc +.builds +*.pidb +*.svclog +*.scc + +# Chutzpah Test files +_Chutzpah* + +# Visual C++ cache files +ipch/ +*.aps +*.ncb +*.opendb +*.opensdf +*.sdf +*.cachefile +*.VC.db +*.VC.VC.opendb + +# Visual Studio profiler +*.psess +*.vsp +*.vspx +*.sap + +# Visual Studio Trace Files +*.e2e + +# TFS 2012 Local Workspace +$tf/ + +# Guidance Automation Toolkit +*.gpState + +# ReSharper is a .NET coding add-in +_ReSharper*/ +*.[Rr]e[Ss]harper +*.DotSettings.user + +# TeamCity is a build add-in +_TeamCity* + +# DotCover is a Code Coverage Tool +*.dotCover + +# AxoCover is a Code Coverage Tool +.axoCover/* +!.axoCover/settings.json + +# Coverlet is a free, cross platform Code Coverage Tool +coverage*.json +coverage*.xml +coverage*.info + +# Visual Studio code coverage results +*.coverage +*.coveragexml + +# NCrunch +_NCrunch_* +.*crunch*.local.xml +nCrunchTemp_* + +# MightyMoose +*.mm.* +AutoTest.Net/ + +# Web workbench (sass) +.sass-cache/ + +# Installshield output folder +[Ee]xpress/ + +# DocProject is a documentation generator add-in +DocProject/buildhelp/ +DocProject/Help/*.HxT +DocProject/Help/*.HxC +DocProject/Help/*.hhc +DocProject/Help/*.hhk +DocProject/Help/*.hhp +DocProject/Help/Html2 +DocProject/Help/html + +# Click-Once directory +publish/ + +# Publish Web Output +*.[Pp]ublish.xml +*.azurePubxml +# Note: Comment the next line if you want to checkin your web deploy settings, +# but database connection strings (with potential passwords) will be unencrypted +*.pubxml +*.publishproj + +# Microsoft Azure Web App publish settings. Comment the next line if you want to +# checkin your Azure Web App publish settings, but sensitive information contained +# in these scripts will be unencrypted +PublishScripts/ + +# NuGet Packages +*.nupkg +# NuGet Symbol Packages +*.snupkg +# The packages folder can be ignored because of Package Restore +**/[Pp]ackages/* +# except build/, which is used as an MSBuild target. +!**/[Pp]ackages/build/ +# Uncomment if necessary however generally it will be regenerated when needed +#!**/[Pp]ackages/repositories.config +# NuGet v3's project.json files produces more ignorable files +*.nuget.props +*.nuget.targets + +# Microsoft Azure Build Output +csx/ +*.build.csdef + +# Microsoft Azure Emulator +ecf/ +rcf/ + +# Windows Store app package directories and files +AppPackages/ +BundleArtifacts/ +Package.StoreAssociation.xml +_pkginfo.txt +*.appx +*.appxbundle +*.appxupload + +# Visual Studio cache files +# files ending in .cache can be ignored +*.[Cc]ache +# but keep track of directories ending in .cache +!?*.[Cc]ache/ + +# Others +ClientBin/ +~$* +*~ +*.dbmdl +*.dbproj.schemaview +*.jfm +*.pfx +*.publishsettings +orleans.codegen.cs + +# Including strong name files can present a security risk +# (https://github.com/github/gitignore/pull/2483#issue-259490424) +#*.snk + +# Since there are multiple workflows, uncomment next line to ignore bower_components +# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622) +#bower_components/ + +# RIA/Silverlight projects +Generated_Code/ + +# Backup & report files from converting an old project file +# to a newer Visual Studio version. Backup files are not needed, +# because we have git ;-) +_UpgradeReport_Files/ +Backup*/ +UpgradeLog*.XML +UpgradeLog*.htm +ServiceFabricBackup/ +*.rptproj.bak + +# SQL Server files +*.mdf +*.ldf +*.ndf + +# Business Intelligence projects +*.rdl.data +*.bim.layout +*.bim_*.settings +*.rptproj.rsuser +*- [Bb]ackup.rdl +*- [Bb]ackup ([0-9]).rdl +*- [Bb]ackup ([0-9][0-9]).rdl + +# Microsoft Fakes +FakesAssemblies/ + +# GhostDoc plugin setting file +*.GhostDoc.xml + +# Node.js Tools for Visual Studio +.ntvs_analysis.dat +node_modules/ + +# Visual Studio 6 build log +*.plg + +# Visual Studio 6 workspace options file +*.opt + +# Visual Studio 6 auto-generated workspace file (contains which files were open etc.) +*.vbw + +# Visual Studio LightSwitch build output +**/*.HTMLClient/GeneratedArtifacts +**/*.DesktopClient/GeneratedArtifacts +**/*.DesktopClient/ModelManifest.xml +**/*.Server/GeneratedArtifacts +**/*.Server/ModelManifest.xml +_Pvt_Extensions + +# Paket dependency manager +.paket/paket.exe +paket-files/ + +# FAKE - F# Make +.fake/ + +# CodeRush personal settings +.cr/personal + +# Python Tools for Visual Studio (PTVS) +__pycache__/ +*.pyc + +# Cake - Uncomment if you are using it +# tools/** +# !tools/packages.config + +# Tabs Studio +*.tss + +# Telerik's JustMock configuration file +*.jmconfig + +# BizTalk build output +*.btp.cs +*.btm.cs +*.odx.cs +*.xsd.cs + +# OpenCover UI analysis results +OpenCover/ + +# Azure Stream Analytics local run output +ASALocalRun/ + +# MSBuild Binary and Structured Log +*.binlog + +# NVidia Nsight GPU debugger configuration file +*.nvuser + +# MFractors (Xamarin productivity tool) working folder +.mfractor/ + +# Local History for Visual Studio +.localhistory/ + +# BeatPulse healthcheck temp database +healthchecksdb + +# Backup folder for Package Reference Convert tool in Visual Studio 2017 +MigrationBackup/ + +# Ionide (cross platform F# VS Code tools) working folder +.ionide/ + +# Fody - auto-generated XML schema +FodyWeavers.xsd \ No newline at end of file diff --git a/RHS-Sachsen.sln b/RHS-Sachsen.sln new file mode 100644 index 0000000..0b7b3a8 --- /dev/null +++ b/RHS-Sachsen.sln @@ -0,0 +1,25 @@ + +Microsoft Visual Studio Solution File, Format Version 12.00 +# Visual Studio Version 17 +VisualStudioVersion = 17.10.35122.118 +MinimumVisualStudioVersion = 10.0.40219.1 +Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "RHS-Sachsen", "RHS-Sachsen\RHS-Sachsen.csproj", "{C2AE63DD-657F-4C35-8CF9-0BC544A24FAD}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Any CPU = Debug|Any CPU + Release|Any CPU = Release|Any CPU + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {C2AE63DD-657F-4C35-8CF9-0BC544A24FAD}.Debug|Any CPU.ActiveCfg = Debug|Any CPU + {C2AE63DD-657F-4C35-8CF9-0BC544A24FAD}.Debug|Any CPU.Build.0 = Debug|Any CPU + {C2AE63DD-657F-4C35-8CF9-0BC544A24FAD}.Release|Any CPU.ActiveCfg = Release|Any CPU + {C2AE63DD-657F-4C35-8CF9-0BC544A24FAD}.Release|Any CPU.Build.0 = Release|Any CPU + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection + GlobalSection(ExtensibilityGlobals) = postSolution + SolutionGuid = {3488C2EB-2BF0-4EF4-AB8C-2B9E56343431} + EndGlobalSection +EndGlobal diff --git a/RHS-Sachsen/Form1.Designer.cs b/RHS-Sachsen/Form1.Designer.cs new file mode 100644 index 0000000..91e6cbd --- /dev/null +++ b/RHS-Sachsen/Form1.Designer.cs @@ -0,0 +1,383 @@ +namespace RHS_Sachsen +{ + partial class Form1 + { + /// + /// Required designer variable. + /// + private System.ComponentModel.IContainer components = null; + + /// + /// Clean up any resources being used. + /// + /// true if managed resources should be disposed; otherwise, false. + protected override void Dispose(bool disposing) + { + if (disposing && (components != null)) + { + components.Dispose(); + } + base.Dispose(disposing); + } + + #region Windows Form Designer generated code + + /// + /// Required method for Designer support - do not modify + /// the contents of this method with the code editor. + /// + private void InitializeComponent() + { + tableLayoutPanel1 = new TableLayoutPanel(); + label1 = new Label(); + txtVerfasser = new TextBox(); + label2 = new Label(); + lblEinsatzort = new Label(); + label4 = new Label(); + label5 = new Label(); + lblSuchgebiergröße = new Label(); + txtAlarmierung = new TextBox(); + txtAnforderung = new TextBox(); + txtEinsatzort = new TextBox(); + txtSuchgebietgroesse = new TextBox(); + dtpDatum = new DateTimePicker(); + btnEinsatzSpeichern = new Button(); + btnEinsatzLaden = new Button(); + btnEinsatzDrucken = new Button(); + label3 = new Label(); + txtLage = new TextBox(); + label6 = new Label(); + label7 = new Label(); + label8 = new Label(); + label9 = new Label(); + txtAnsprechpartner = new TextBox(); + txtRufnummer = new TextBox(); + txtFunk1 = new TextBox(); + txtFunk2 = new TextBox(); + tableLayoutPanel1.SuspendLayout(); + SuspendLayout(); + // + // tableLayoutPanel1 + // + tableLayoutPanel1.ColumnCount = 4; + tableLayoutPanel1.ColumnStyles.Add(new ColumnStyle(SizeType.Percent, 18.25F)); + tableLayoutPanel1.ColumnStyles.Add(new ColumnStyle(SizeType.Percent, 31.75F)); + tableLayoutPanel1.ColumnStyles.Add(new ColumnStyle(SizeType.Percent, 14.875F)); + tableLayoutPanel1.ColumnStyles.Add(new ColumnStyle(SizeType.Percent, 35.125F)); + tableLayoutPanel1.Controls.Add(label1, 0, 0); + tableLayoutPanel1.Controls.Add(txtVerfasser, 1, 0); + tableLayoutPanel1.Controls.Add(label2, 2, 0); + tableLayoutPanel1.Controls.Add(lblEinsatzort, 2, 1); + tableLayoutPanel1.Controls.Add(label4, 0, 1); + tableLayoutPanel1.Controls.Add(label5, 0, 2); + tableLayoutPanel1.Controls.Add(lblSuchgebiergröße, 2, 2); + tableLayoutPanel1.Controls.Add(txtAlarmierung, 1, 1); + tableLayoutPanel1.Controls.Add(txtAnforderung, 1, 2); + tableLayoutPanel1.Controls.Add(txtEinsatzort, 3, 1); + tableLayoutPanel1.Controls.Add(txtSuchgebietgroesse, 3, 2); + tableLayoutPanel1.Controls.Add(dtpDatum, 3, 0); + tableLayoutPanel1.Controls.Add(btnEinsatzSpeichern, 3, 12); + tableLayoutPanel1.Controls.Add(btnEinsatzLaden, 2, 12); + tableLayoutPanel1.Controls.Add(btnEinsatzDrucken, 1, 12); + tableLayoutPanel1.Controls.Add(label3, 0, 3); + tableLayoutPanel1.Controls.Add(txtLage, 1, 3); + tableLayoutPanel1.Controls.Add(label6, 0, 5); + tableLayoutPanel1.Controls.Add(label7, 0, 6); + tableLayoutPanel1.Controls.Add(label8, 2, 5); + tableLayoutPanel1.Controls.Add(label9, 2, 6); + tableLayoutPanel1.Controls.Add(txtAnsprechpartner, 1, 5); + tableLayoutPanel1.Controls.Add(txtRufnummer, 1, 6); + tableLayoutPanel1.Controls.Add(txtFunk1, 3, 5); + tableLayoutPanel1.Controls.Add(txtFunk2, 3, 6); + tableLayoutPanel1.Dock = DockStyle.Fill; + tableLayoutPanel1.Location = new Point(0, 0); + tableLayoutPanel1.Name = "tableLayoutPanel1"; + tableLayoutPanel1.RowCount = 13; + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 30F)); + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 30F)); + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 30F)); + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 30F)); + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 30F)); + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 30F)); + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 30F)); + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 30F)); + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 30F)); + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 30F)); + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 30F)); + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 30F)); + tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Percent, 100F)); + tableLayoutPanel1.Size = new Size(800, 450); + tableLayoutPanel1.TabIndex = 0; + // + // label1 + // + label1.Anchor = AnchorStyles.Left; + label1.AutoSize = true; + label1.Location = new Point(3, 7); + label1.Name = "label1"; + label1.Size = new Size(87, 15); + label1.TabIndex = 1; + label1.Text = "Verfasser / Org."; + // + // txtVerfasser + // + txtVerfasser.Dock = DockStyle.Fill; + txtVerfasser.Location = new Point(149, 3); + txtVerfasser.Name = "txtVerfasser"; + txtVerfasser.Size = new Size(248, 23); + txtVerfasser.TabIndex = 0; + // + // label2 + // + label2.Anchor = AnchorStyles.Left; + label2.AutoSize = true; + label2.Location = new Point(403, 7); + label2.Name = "label2"; + label2.Size = new Size(46, 15); + label2.TabIndex = 2; + label2.Text = "Datum:"; + // + // lblEinsatzort + // + lblEinsatzort.Anchor = AnchorStyles.Left; + lblEinsatzort.AutoSize = true; + lblEinsatzort.Location = new Point(403, 37); + lblEinsatzort.Name = "lblEinsatzort"; + lblEinsatzort.Size = new Size(61, 15); + lblEinsatzort.TabIndex = 3; + lblEinsatzort.Text = "Einsatzort:"; + // + // label4 + // + label4.Anchor = AnchorStyles.Left; + label4.AutoSize = true; + label4.Location = new Point(3, 37); + label4.Name = "label4"; + label4.Size = new Size(110, 15); + label4.TabIndex = 4; + label4.Text = "Alarmierung durch:"; + // + // label5 + // + label5.Anchor = AnchorStyles.Left; + label5.AutoSize = true; + label5.Location = new Point(3, 67); + label5.Name = "label5"; + label5.Size = new Size(112, 15); + label5.TabIndex = 5; + label5.Text = "Anforderung durch:"; + // + // lblSuchgebiergröße + // + lblSuchgebiergröße.Anchor = AnchorStyles.Left; + lblSuchgebiergröße.AutoSize = true; + lblSuchgebiergröße.Location = new Point(403, 67); + lblSuchgebiergröße.Name = "lblSuchgebiergröße"; + lblSuchgebiergröße.Size = new Size(104, 15); + lblSuchgebiergröße.TabIndex = 6; + lblSuchgebiergröße.Text = "Größe Suchgebiet:"; + // + // txtAlarmierung + // + txtAlarmierung.Dock = DockStyle.Fill; + txtAlarmierung.Location = new Point(149, 33); + txtAlarmierung.Name = "txtAlarmierung"; + txtAlarmierung.Size = new Size(248, 23); + txtAlarmierung.TabIndex = 2; + // + // txtAnforderung + // + txtAnforderung.Dock = DockStyle.Fill; + txtAnforderung.Location = new Point(149, 63); + txtAnforderung.Name = "txtAnforderung"; + txtAnforderung.Size = new Size(248, 23); + txtAnforderung.TabIndex = 4; + // + // txtEinsatzort + // + txtEinsatzort.Dock = DockStyle.Fill; + txtEinsatzort.Location = new Point(522, 33); + txtEinsatzort.Name = "txtEinsatzort"; + txtEinsatzort.Size = new Size(275, 23); + txtEinsatzort.TabIndex = 3; + // + // txtSuchgebietgroesse + // + txtSuchgebietgroesse.Dock = DockStyle.Fill; + txtSuchgebietgroesse.Location = new Point(522, 63); + txtSuchgebietgroesse.Name = "txtSuchgebietgroesse"; + txtSuchgebietgroesse.Size = new Size(275, 23); + txtSuchgebietgroesse.TabIndex = 5; + // + // dtpDatum + // + dtpDatum.Location = new Point(522, 3); + dtpDatum.Name = "dtpDatum"; + dtpDatum.Size = new Size(194, 23); + dtpDatum.TabIndex = 1; + dtpDatum.Value = new DateTime(2024, 8, 20, 0, 0, 0, 0); + // + // btnEinsatzSpeichern + // + btnEinsatzSpeichern.Location = new Point(522, 363); + btnEinsatzSpeichern.Name = "btnEinsatzSpeichern"; + btnEinsatzSpeichern.Size = new Size(164, 23); + btnEinsatzSpeichern.TabIndex = 13; + btnEinsatzSpeichern.Text = "Einsatz speichern"; + btnEinsatzSpeichern.UseVisualStyleBackColor = true; + btnEinsatzSpeichern.Click += btnEinsatzSpeichern_Click; + // + // btnEinsatzLaden + // + btnEinsatzLaden.Location = new Point(403, 363); + btnEinsatzLaden.Name = "btnEinsatzLaden"; + btnEinsatzLaden.Size = new Size(113, 23); + btnEinsatzLaden.TabIndex = 14; + btnEinsatzLaden.Text = "Einsatz laden"; + btnEinsatzLaden.UseVisualStyleBackColor = true; + // + // btnEinsatzDrucken + // + btnEinsatzDrucken.Location = new Point(149, 363); + btnEinsatzDrucken.Name = "btnEinsatzDrucken"; + btnEinsatzDrucken.Size = new Size(150, 23); + btnEinsatzDrucken.TabIndex = 15; + btnEinsatzDrucken.Text = "Einsatz drucken"; + btnEinsatzDrucken.UseVisualStyleBackColor = true; + // + // label3 + // + label3.Anchor = AnchorStyles.Left; + label3.AutoSize = true; + label3.Location = new Point(3, 97); + label3.Name = "label3"; + label3.Size = new Size(35, 15); + label3.TabIndex = 16; + label3.Text = "Lage:"; + // + // txtLage + // + tableLayoutPanel1.SetColumnSpan(txtLage, 3); + txtLage.Dock = DockStyle.Fill; + txtLage.Location = new Point(149, 93); + txtLage.Multiline = true; + txtLage.Name = "txtLage"; + tableLayoutPanel1.SetRowSpan(txtLage, 2); + txtLage.Size = new Size(648, 54); + txtLage.TabIndex = 6; + // + // label6 + // + label6.Anchor = AnchorStyles.Left; + label6.AutoSize = true; + label6.Location = new Point(3, 157); + label6.Name = "label6"; + label6.Size = new Size(138, 15); + label6.TabIndex = 18; + label6.Text = "Ansprechpartner vor Ort:"; + // + // label7 + // + label7.Anchor = AnchorStyles.Left; + label7.AutoSize = true; + label7.Location = new Point(3, 187); + label7.Name = "label7"; + label7.Size = new Size(120, 15); + label7.TabIndex = 19; + label7.Text = "andere Rufnummern:"; + // + // label8 + // + label8.Anchor = AnchorStyles.Left; + label8.AutoSize = true; + label8.Location = new Point(403, 157); + label8.Name = "label8"; + label8.Size = new Size(36, 15); + label8.TabIndex = 20; + label8.Text = "Funk:"; + // + // label9 + // + label9.Anchor = AnchorStyles.Left; + label9.AutoSize = true; + label9.Location = new Point(403, 187); + label9.Name = "label9"; + label9.Size = new Size(36, 15); + label9.TabIndex = 21; + label9.Text = "Funk:"; + // + // txtAnsprechpartner + // + txtAnsprechpartner.Dock = DockStyle.Fill; + txtAnsprechpartner.Location = new Point(149, 153); + txtAnsprechpartner.Name = "txtAnsprechpartner"; + txtAnsprechpartner.Size = new Size(248, 23); + txtAnsprechpartner.TabIndex = 7; + // + // txtRufnummer + // + txtRufnummer.Dock = DockStyle.Fill; + txtRufnummer.Location = new Point(149, 183); + txtRufnummer.Name = "txtRufnummer"; + txtRufnummer.Size = new Size(248, 23); + txtRufnummer.TabIndex = 9; + // + // txtFunk1 + // + txtFunk1.Dock = DockStyle.Fill; + txtFunk1.Location = new Point(522, 153); + txtFunk1.Name = "txtFunk1"; + txtFunk1.Size = new Size(275, 23); + txtFunk1.TabIndex = 8; + // + // txtFunk2 + // + txtFunk2.Dock = DockStyle.Fill; + txtFunk2.Location = new Point(522, 183); + txtFunk2.Name = "txtFunk2"; + txtFunk2.Size = new Size(275, 23); + txtFunk2.TabIndex = 10; + // + // Form1 + // + AutoScaleDimensions = new SizeF(7F, 15F); + AutoScaleMode = AutoScaleMode.Font; + ClientSize = new Size(800, 450); + Controls.Add(tableLayoutPanel1); + Name = "Form1"; + Text = "Form1"; + tableLayoutPanel1.ResumeLayout(false); + tableLayoutPanel1.PerformLayout(); + ResumeLayout(false); + } + + #endregion + + private TableLayoutPanel tableLayoutPanel1; + private Label label1; + private TextBox txtVerfasser; + private Label label2; + private Label lblEinsatzort; + private Label label4; + private Label label5; + private Label lblSuchgebiergröße; + private TextBox txtAlarmierung; + private TextBox txtAnforderung; + private TextBox txtEinsatzort; + private TextBox txtSuchgebietgroesse; + private DateTimePicker dtpDatum; + private Button btnEinsatzSpeichern; + private Button btnEinsatzLaden; + private Button btnEinsatzDrucken; + private Label label3; + private TextBox txtLage; + private Label label6; + private Label label7; + private Label label8; + private Label label9; + private TextBox txtAnsprechpartner; + private TextBox txtRufnummer; + private TextBox txtFunk1; + private TextBox txtFunk2; + } +} diff --git a/RHS-Sachsen/Form1.cs b/RHS-Sachsen/Form1.cs new file mode 100644 index 0000000..18429d6 --- /dev/null +++ b/RHS-Sachsen/Form1.cs @@ -0,0 +1,89 @@ +using MySql.Data.MySqlClient; + +namespace RHS_Sachsen +{ + public partial class Form1 : Form + { +#if DEBUG + String connectionString = "Server=192.168.178.201;Database=rhs_sachsen;User ID=rhs_sachsen;Password=AX6Tcj-pB].dSK_("; +#else + String connectionString = "Server=155.133.215.203;Database=rhs_sachsen;User ID=rhs_sachsen;Password=AX6Tcj-pB].dSK_("; +#endif + public Form1() + { + InitializeComponent(); + FelderAufStandartSetzen(); + } + + private void btnEinsatzSpeichern_Click(object sender, EventArgs e) + { + using (MySqlConnection connection = new MySqlConnection(connectionString)) + { + try + { + connection.Open(); + + // SQL-Query für das Einfügen eines neuen Datensatzes in die Tabelle Einsatzberichte + string query = @" + INSERT INTO Einsatzberichte + (Verfasser, Alarmierung, Anforderung, Datum, Einsatzort, Groesse_Suchgebiet, Lage, Ansprechpartner, Rufnummer, Funk1, Funk2) + VALUES + (@Verfasser, @Alarmierung, @Anforderung, @Datum, @Einsatzort, @Groesse_Suchgebiet, @Lage, @Ansprechpartner, @Rufnummer, @Funk1, @Funk2);"; + + // Beispielwerte für die Parameter + string verfasser = txtVerfasser.Text; + string alarmierung = txtAlarmierung.Text; + string anforderung = txtAnforderung.Text; + DateTime datum = dtpDatum.Value; + string einsatzort = txtEinsatzort.Text; + string groesseSuchgebiet = txtSuchgebietgroesse.Text; + string lage = txtLage.Text; + string ansprechpartner = txtAnsprechpartner.Text; + string rufnummer = txtRufnummer.Text; + string funk1 = txtFunk1.Text; + string funk2 = txtFunk2.Text; + + using (MySqlCommand command = new MySqlCommand(query, connection)) + { + // Parameterwerte setzen + command.Parameters.AddWithValue("@Verfasser", verfasser); + command.Parameters.AddWithValue("@Alarmierung", alarmierung); + command.Parameters.AddWithValue("@Anforderung", anforderung); + command.Parameters.AddWithValue("@Datum", datum); + command.Parameters.AddWithValue("@Einsatzort", einsatzort); + command.Parameters.AddWithValue("@Groesse_Suchgebiet", groesseSuchgebiet); + command.Parameters.AddWithValue("@Lage", lage); + command.Parameters.AddWithValue("@Ansprechpartner", ansprechpartner); + command.Parameters.AddWithValue("@Rufnummer", rufnummer); + command.Parameters.AddWithValue("@Funk1", funk1); + command.Parameters.AddWithValue("@Funk2", funk2); + + // SQL-Befehl ausführen + int rowsAffected = command.ExecuteNonQuery(); + Console.WriteLine($"{rowsAffected} Datensatz erfolgreich eingefügt."); + } + FelderAufStandartSetzen(); + } + catch (Exception ex) + { + Console.WriteLine("Fehler: " + ex.Message); + } + } + } + + private void FelderAufStandartSetzen() + { + txtVerfasser.Clear(); + txtAlarmierung.Clear(); + txtAnforderung.Clear(); + dtpDatum.Value = DateTime.Now; + txtEinsatzort.Clear(); + txtSuchgebietgroesse.Clear(); + txtLage.Clear(); + txtAnsprechpartner.Clear(); + txtRufnummer.Clear(); + txtFunk1.Clear(); + txtFunk2.Clear(); + } + } +} diff --git a/RHS-Sachsen/Form1.resx b/RHS-Sachsen/Form1.resx new file mode 100644 index 0000000..af32865 --- /dev/null +++ b/RHS-Sachsen/Form1.resx @@ -0,0 +1,120 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + text/microsoft-resx + + + 2.0 + + + System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 + + + System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 + + \ No newline at end of file diff --git a/RHS-Sachsen/Program.cs b/RHS-Sachsen/Program.cs new file mode 100644 index 0000000..52fcb65 --- /dev/null +++ b/RHS-Sachsen/Program.cs @@ -0,0 +1,17 @@ +namespace RHS_Sachsen +{ + internal static class Program + { + /// + /// The main entry point for the application. + /// + [STAThread] + static void Main() + { + // To customize application configuration such as set high DPI settings or default font, + // see https://aka.ms/applicationconfiguration. + ApplicationConfiguration.Initialize(); + Application.Run(new Form1()); + } + } +} \ No newline at end of file diff --git a/RHS-Sachsen/RHS-Sachsen.csproj b/RHS-Sachsen/RHS-Sachsen.csproj new file mode 100644 index 0000000..2ffdbd7 --- /dev/null +++ b/RHS-Sachsen/RHS-Sachsen.csproj @@ -0,0 +1,16 @@ + + + + WinExe + net8.0-windows + RHS_Sachsen + enable + true + enable + + + + + + + \ No newline at end of file